User`s guide

Configuring Ports
Aggregating Ports
Page 86
• PVE — Enables a port to be a Private VLAN Edge (PVE) port. When a port is defined as PVE, it bypasses the
Forwarding Database (FDB), and forwards all Unicast, Multicast and Broadcast traffic to an uplink (except
MAC-to-me packets). Uplinks can be a port or GE port. Traffic from the uplink is distributed to all interfaces.
3. Modify the fields.
4. Click Apply. The Trunk settings are saved and the device is updated.
Defining Port Trunking
The Port Trunking Page displays information about the defined trunks.
To modify Port Trunking settings:
1. Click Layer 1 > Port Trunking. The Port Trunking Page opens:
Figure 58: Port Trunking Page
The Port Trunking Page contains information about all port trunks currently defined on the device. The following
information is displayed:
• Trunk — Displays the ID number of the trunk.
• Name — Displays the name of the trunk. The name can be up to sixteen alphanumeric characters. No
spaces or special characters, such as asterisks and exclamation points, are allowed. Each trunk must be
given a unique name.
• Link State —Indicates the current link status.
• Members — Indicates the ports which are defined for the trunk.
2. Select the trunk to modify.
3. Click Modify. The Port Trunking Configuration Page opens: