User`s guide

Configuring Ports
Aggregating Ports
Page 85
• Current Status — Indicates whether the trunk is currently operational or non-operational. The possible field
values are:
– Up — Indicates the trunk is currently operating.
– Down — Indicates the trunk is currently not operating.
• Reactivate Suspended — Reactivates suspended trunks. The possible field values are:
– Checked — Reactivates the selected suspended trunk.
– Unchecked — Maintains the trunk status. This is the default value.
• Operational Status — Indicates the trunk operational status. Possible field values are:
– Suspended — The trunk is currently active, and is not receiving or transmitting traffic.
– Active — Indicates the trunk is currently active and is receiving and transmitting traffic.
– Disable — Indicates the trunk is currently disabled, and is not receiving or transmitting traffic.
• Admin Auto Negotiation — Displays the auto negotiation status on the trunk. Auto negotiation is a protocol
between two link partners that enables a trunk to advertise its transmission rate, duplex mode, and flow
control abilities to its partner.
• Current Auto Negotiation — Displays the current Auto Negotiation setting.
• Admin Advertisement — Defines the auto negotiation setting the trunk advertises. The possible field values
are:
– Max Capability — Indicates that all trunk speeds and duplex mode settings are accepted.
– 10 Half — Indicates that the trunk advertises for a 10 Mbps speed trunk and half duplex mode setting.
– 10 Full — Indicates that the trunk advertises for a 10 Mbps speed trunk and full duplex mode setting.
– 100 Half — Indicates that the trunk advertises for a 100 Mbps speed trunk and half duplex mode setting.
– 100 Full — Indicates that the trunk advertises for a 100 Mbps speed trunk and full duplex mode setting.
– 1000 Full — Indicates that the trunk advertises for a 1000 Mbps speed trunk and full duplex mode
setting.
• Current Advertisement — Indicates the trunk advertises its speed to its neighbor trunk to start the
negotiation process. The possible field values are those specified in the Admin Advertisement field.
• Neighbor Advertisement — Indicates the neighboring trunk’s advertisement settings. The field values are
identical to the Admin Advertisement field values.
• Admin Speed — Indicates the configured rate for the trunk. The trunk type determines the speed settings
available. Trunk speeds can only be configured when auto-negotiation is disabled. The possible field values
are:
– 10M — Indicates the trunk is currently operating at 10 Mbps.
– 100M — Indicates the trunk is currently operating at 100 Mbps.
• Current Speed — Displays the configured rate for the trunk.
• Admin Flow Control — Displays the flow control status on the trunk. Operates when the trunk is in full
duplex mode.
– Enable — Indicates that flow control is currently enabled for the selected trunk. This is the default value.
– Disable — Indicates that flow control is currently disabled for the selected trunk.
• Current Flow Control — Displays the current Flow Control setting.
• LACP — Indicates if LACP is enabled on the trunk. The possible values are:
– Enabled — LACP is enabled on the trunk.
– Disabled — LACP is disabled on the trunk.