User`s guide

Configuring Ports
Aggregating Ports
Page 84
– Disable — LACP is disabled on the trunk.
• PVE — Enables a port to be a Private VLAN Edge (PVE) port. When a port is defined as PVE, it bypasses the
Forwarding Database (FDB), and forwards all Unicast, Multicast and Broadcast traffic to an uplink (except
MAC-to-me packets). Uplinks can be a port or GE port. Traffic from the uplink is distributed to all interfaces.
2. Click Modify. The Trunk Setting Configuration Page opens:
Figure 57: Trunk Setting Configuration Page
The Trunk Setting Configuration Page contains the following fields:
• Trunk— Lists the names of configured trunks.
• Description — Provides a user-defined trunk description.
• Type — Indicates the type of trunk.
• Admin Status — Displays the link operational status. Changes to the trunk state are active only after the
device is reset. The possible field values are:
– Up — Indicates that the trunk is currently operating.
– Down — Indicates that the trunk is currently not operating.