User`s guide

Configuring DHCP Snooping
Page 73
Binding Addresses to the DHCP Snooping Database
The Binding Database Page contains parameters for querying and adding IP addresses to the DHCP Snooping
Database.
To bind addresses to the DHCP Snooping database:
1. Click DHCP Snooping > Binding Database. The Binding Database Page opens:
Figure 49: Binding Database Page
2. Define any of the following fields as a query filter:
Query Parameters
•
MAC Address — Indicates the MAC addresses recorded in the DHCP Database. The Database can be
queried by MAC address.
• IP Address — Indicates the IP addresses recorded in the DHCP Database The Database can be queried by
IP address.
• VLAN — Indicates the VLANs recorded in the DHCP Database. The Database can be queried by VLAN.
• Interface — Contains a list of interface by which the DHCP Database can be queried. The possible field
values are:
– Unit No. and Port — Queries the VLAN database by a specific stacking member and port number.
– Trunk — Queries the VLAN database by trunk number.
3. Click Query. The results appear in the Query Results table.