System information

Operation SHOW ALIAS 1-95
Software Release 2.0.1
C613-03018-00 REV A
The SECUREDELAY parameter sets the number of seconds that may elapse
between the entry of one security command and the next without the user
being required to re-enter the SECURITY OFFICER password to validate the
command. The default is 60 seconds.
The MINPWDLEN parameter sets the minimum password length that will be
enforced for the ADD USER commands and SET PASSWORD commands. The
default is 6 characters.
The TACRETRIES parameters sets the number of times a TACACS request will
be resent when a response is not received within the timeout period. The
default value is 3.
The TACTIMEOUT parameter sets the number of seconds the router will wait
for a TACACS response before retransmitting the request, or giving up if the
number of retries permitted has been reached. The default value is 5 seconds.
Examples
To change the password to “BZ4gal” and the privilege level to MANAGER for
user BRUCE, use the command:
SET USER=BRUCE PASSWORD=BZ4gal PRIVILEGE=MANAGER
To change the minimum password length to eight characters for all users, use
the command:
SET USER MINPWDLEN=8
See Also
ADD USER
DELETE USER
DISABLE SYSTEM SECURITY_MODE
DISABLE USER
ENABLE SYSTEM SECURITY_MODE
ENABLE USER
PURGE USER
RESET USER
SHOW USER
SHOW ALIAS
Syntax
SHOW ALIAS
Description
This command displays the aliases currently defined on the router (Table 1-8
on page 1-95, Table 1-12 on page 1-96).
Figure 1-8: Example output from the SHOW ALIAS command.
Alias ....... df
String .... delete file=1-190.rez
Alias ....... ii
String .... ip interface