System information

1-90 SET SYSTEM LOCATION AR Series Router Reference Manual
Software Release 2.0.1
C613-03018-00 REV A
SET SYSTEM LOCATION
Syntax
SET SYSTEM LOCATION=location
where:
■
location is a character string, 1 to 256 characters in length. Valid characters
are any printable character. If the string includes spaces it must be enclosed
in double quotes.
Description
This command assigns a string defining the physical location of this router. For
example “Laboratory, First Floor, Head Office Building”. The string can be a
maximum of 80 characters. The text is displayed in the output of the SHOW
SYSTEM command on page 1-124. It also updates the MIB object sysLocation
which can then be read using SNMP.
Examples
To set the location for this router to “Laboratory, First Floor, Head Office
Building”, use the command:
SET SYSTEM LOCATION=“Laboratory, First Floor, Head Office
Building”
See Also
SET SYSTEM CONTACT
SET SYSTEM NAME
SET SYSTEM TERRITORY
SHOW SYSTEM
SET SYSTEM NAME
Syntax
SET SYSTEM NAME=name
where:
■
name is a character string, 1 to 256 characters in length. Valid characters are
any printable character. If the string includes spaces it must be enclosed in
double quotes.
Description
This command assigns a string defining the name of this router. By convention
this is the full domain name of the IP entity. For example,
nd1.co.nz
. The
name can be a maximum of 80 characters. The text is displayed in the output of
the SHOW SYSTEM command on page 1-124. It also updates the MIB object
sysName which can then be read using SNMP.
Examples
To set the name for this router to “nd1.co.nz”, use the command:
SET SYSTEM NAME=“nd1.co.nz”
See Also
SET SYSTEM CONTACT
SET SYSTEM LOCATION
SET SYSTEM TERRITORY
SHOW SYSTEM