System information

Operation SET SYSTEM CONTACT 1-89
Software Release 2.0.1
C613-03018-00 REV A
SET PASSWORD
Syntax
SET PASSWORD
Description
This command changes the login password for the user currently logged in to
the port from which the command was entered. If a user is not logged in to the
port an error message is displayed. If a user is logged in to the port, the user is
prompted for the existing password, the new password and confirmation of
the new password. The passwords entered are not echoed to the screen.
The new password and the confirmation must be identical for the change to
take affect. This reduces the chances of a typing error causing the password to
be different from what the user intended.
A log message is generated whenever the password for an account with
MANAGER privilege is changed. A configurable minimum password length is
enforced. The default is 6 characters.
Examples
To change the password for the current user, use the command:
SET PASSWORD
Old password:
New password:
Confirm:
See Also
ADD USER
SET USER
SET SYSTEM CONTACT
Syntax
SET SYSTEM CONTACT=contact-name
where:
■ contact-name is a character string, 1 to 256 characters in length. Valid
characters are any printable character. If the string includes spaces it must
be enclosed in double quotes.
Description
This command assigns a string defining the contact name for this router. For
example “Bruce Johns, 64-3-343-0803”. The string can be a maximum of 80
characters. The text is displayed in the output of the SHOW SYSTEM
command on page 1-124. It also updates the MIB object sysContact which can
then be read using SNMP.
Examples
To set the contact name for this router to “Bruce Johns, 64-3-343-0803”, use the
command:
SET SYSTEM CONTACT=“Bruce Johns, 64-3-343-0803”
See Also
SET SYSTEM LOCATION
SET SYSTEM NAME
SET SYSTEM TERRITORY
SHOW SYSTEM