System information

1-86 SET MANAGER PORT AR Series Router Reference Manual
Software Release 2.0.1
C613-03018-00 REV A
SET MANAGER PORT
Syntax
SET MANAGER PORT={port-number|NONE}
where:
■
port-number is the number of the port. Ports are numbered sequentially
starting with port 0.
Description
This command sets the semipermanent manager port. If a valid port number is
specified the port becomes the semipermanent manager port. If the specified
port was secure before the command was entered it loses its secure setting. If
any other port is currently the semipermanent manager port then that port
loses its semipermanent MANAGER privilege and becomes a secure port. If
NONE is specified the current semipermanent manager port (if any) loses its
semipermanent MANAGER privilege and becomes a secure port. There may
be no more than one semipermanent manager port at any time.
This command is one of the security commands (see “Database Security” on page 1-15).
If the security timer expires before the command is entered, the manager will be
prompted to re-enter the password for the login name from which the command was
issued.
Examples
To set port 0 as the semipermanent manager port, use the command:
SET MANAGER PORT=0
To remove the semipermanent manager port, use the command:
SET MANAGER PORT=NONE
See Also
LOGIN
SHOW MANAGER PORT
SET PORT in Chapter 2, Interfaces
SET NVS CLEAR_TOTALLY
Syntax
SET NVS CLEAR_TOTALLY
Description
This command resets the nonvolatile storage (NVS) and deletes all the NVS
blocks.
For security reasons this command will only be accepted if the user has SECURITY
OFFICER privilege.
See Also
SET NVS CREATE
SET NVS DELETE
SET NVS MODIFY
SHOW NVS