System information

1-66 ENABLE HTTP SERVER AR Series Router Reference Manual
Software Release 2.0.1
C613-03018-00 REV A
Examples
To enable debugging of authentication attempts and HTTP GET/SET
messages, use the commands:
ENABLE HTTP DEBUG=AUTH
ENABLE HTTP DEBUG=MSG
See Also
DISABLE HTTP DEBUG
DISABLE HTTP SERVER
ENABLE HTTP SERVER
RESET HTTP SERVER
SET HTTP SERVER
SHOW HTTP CLIENT
SHOW HTTP DEBUG
SHOW HTTP SERVER
SHOW HTTP SESSION
ENABLE HTTP SERVER
Syntax
ENABLE HTTP SERVER
Description
This command enables the HTTP server. The HTTP server serves HTML pages
out of the router’s FLASH memory to a web browser, and allows users to login
into the router. The server is enabled by default.
Examples
To enable the HTTP server, use the command:
ENABLE HTTP SERVER
See Also
DISABLE HTTP DEBUG
DISABLE HTTP SERVER
ENABLE HTTP DEBUG
RESET HTTP SERVER
SET HTTP SERVER
SHOW HTTP CLIENT
SHOW HTTP DEBUG
SHOW HTTP SERVER
SHOW HTTP SESSION
ENABLE MAIL DEBUG
Syntax
ENABLE MAIL DEBUG
Description
This command enables the display of debugging information for mail. When
debugging is enabled, messages recording the progress of email messages are
displayed to the terminal from which the command was entered. By default
debugging is disabled.
Examples
To enable mail debug, use the command:
ENABLE MAIL DEBUG