System information

Operation DISABLE SYSTEM SECURITY_MODE 1-59

Software Release 2.0.1

C613-03018-00 REV A

DISABLE RELEASE

Syntax

DISABLE RELEASE=release-name

where:

■

release-name is the name of a release file, of the form

device:filename.ext

. Valid characters are the lowercase letters (a–z),

digits (0–9) and the hyphen character (-). Wildcards are not allowed.

Description

This command removes the licence for the specified release file.

The RELEASE parameter specifies the name of the release file. If the device

field is not specified, the default is

FLASH

Examples

To disable release 28-761.rel, use the command:

DISABLE RELEASE=28-761.REL

See Also

ENABLE RELEASE

SHOW RELEASE

DISABLE SYSTEM SECURITY_MODE

Syntax

DISABLE SYSTEM SECURITY_MODE

Description

This command disables security mode on the router. When the router is

operating in security mode, a subset of router commands, called the security

commands, require SECURITY OFFICER privilege to execute. Sensitive data

files such as encryption key files can only be stored in the router’s file

subsystem when the router is in security mode.

When security mode is disabled, all sensitive data files (e.g. encryption key

files) are deleted from the router’s file subsystem.

Security mode should be enabled on any router that is fitted with a hardware

encryption device or is configured to provide secure features like encryption,

authentication or Secure Shell.

Examples

To disable security mode, use the command:

DISABLE SYSTEM SECURITY_MODE