System information
1-56 DELETE USER RSO AR Series Router Reference Manual
Software Release 2.0.1
C613-03018-00 REV A
DELETE USER RSO
Syntax
DELETE USER RSO IP=ipadd
where:
■
ipadd is an IP address in dotted decimal notation.
Description
This command deletes a Remote Security Officer address range from the
remote access user list. Remote Security Officers who currently have
SECURITY OFFICER privilege will lose SECURITY OFFICER privilege
immediately.
The IP parameter specifies the base IP address for this range of Remote
Security Officer addresses.
For security reasons this command will only be accepted if the user has SECURITY
OFFICER privilege.
Examples
To delete the IP address 192.168.11.7 from the list of Remote Security Officers,
use the command:
DELETE USER RSO IP=192.168.11.7
See Also
ADD USER RSO
DISABLE USER RSO
ENABLE USER RSO
SHOW USER RSO
DESTROY PATCH
Syntax
DESTROY PATCH=name
where:
■
name is the name of a patch file.
Description
This command deletes a patch file stored in NVS. Patch files stored in FLASH
must be deleted with the DELETE FILE command on page 1-52.
Examples
To delete the patch
COMMON.PAT
from NVS, use the command:
DESTROY PATCH=COMMON.PAT
See Also
DELETE FILE
LOAD
SHOW PATCH