Manualshelf

System information

ManualsBrandsAllied Telesis ManualsComputer equipmentAT-2501 Series
31323334353637383940
1-40 AR Series Router Reference Manual
Software Release 2.0.1
C613-03018-00 REV A
The install information can be checked with the command:
SHOW INSTALL
The router is then rebooted, and the install is checked again. This display
should indicate, in the install history, that the temporary install was
loaded.
5. Make the release the default (permanent) release.
If the router operates correctly with the new release, the release may be
made permanent with the command:
SET INSTALL=PREFERRED RELEASE=8-761.REL
Every time the router reboots from now on, the new release will be loaded
from FLASH.
Installing a Standard Patch
This example illustrates how to install a standard patch on a router.
To install a standard patch:
1. Download the patch file to the router.
Download the patch file 8761-01.pat into the router with the command:
LOAD FILE=8761-01.PAT
This download takes a lot less time than the download of the release file,
and is verified by showing the file in FLASH.
2. Test the patch.
As with the release, the patch should first be checked by incorporating it
into a temporary install, with the command:
SET INSTALL=TEMPORARY RELEASE=8-761.REL PATCH=8761-01.PAT
The router is then rebooted, and the install is checked again. This display
should indicate, in the install history, that the temporary install was
loaded.
3. Make the patch the default (permanent) patch.
If the router operates correctly with the new patch, the patch may be added
to the preferred install with the command:
SET INSTALL=PREFERRED PATCH=8761-01.PAT
The release information is still present in the preferred install and does not
have to be re-entered.
Installing a Compressed Release
This example is identical to the previous example, except that a compressed
release and patch are installed.
To install a compressed release:
1. Configure the loader.
The LOADER module is set up with defaults to make the process of
downloading files in future simpler. All release and patch files in this
router will be stored in FLASH.
SET LOADER SERVER=172.16.1.1 DEST=FLASH