System information

1-20 AR Series Router Reference Manual
Software Release 2.0.1
C613-03018-00 REV A
Table 1-4 on page 1-20 lists the RADIUS attributes supported by the router.
Table 1-4: RADIUS attributes supported by the router.
RADIUS Attribute Name When Used Description
User-Name Authentication request
Accounting request
The name of the user to be authenticated.
User-Password Authentication request The password of the user to be authenticated, or the user’s
input following an
Access-Challenge
.
CHAP-Password Authentication request The response value provided by a PPP CHAP user in
response to a challenge.
NAS-IP-Address Authentication request
Accounting request
The identifying IP Address of the NAS which is requesting
authentication of the user.
NAS-PORT Authentication request The physical port number of the NAS which is
authenticating the user.
Calling-Station-Id Authentication request The number that the call to the NAS came from, using
Automatic Number Identification (ANI) or similar
technology.
Framed-IP-Address Authentication accept The address to be configured for the user.
Framed-IP-Netmask Authentication accept The IP Netmask to be configured for the user when the user
is a router to a network.
Callback-Number Authentication accept A dialling string to be used for callback.
Framed-Route Authentication accept Provides routing information to be configured for the user
on the NAS.
Framed-IPX-Network Authentication accept The IPX Network number to be configured for the user.
Session-Timeout Authentication accept The maximum number of seconds of service to be provided
to the user before the session terminates.
Idle-Timeout Authentication accept The maximum number of consecutive seconds of idle
connection allowed to the user before prompt or
termination of the session.
Framed-AppleTalk-Network Authentication accept The AppleTalk Network number which the NAS should
probe to allocate an AppleTalk node for the user.
Framed-AppleTalk-Zone Authentication accept The AppleTalk Default Zone to be used for this user.
CHAP-Challenge Authentication request The CHAP Challenge sent by NAS to a PPP CHAP user.
Acct-Status-Type Authentication start Whether or not the
Accounting Request
marks the
beginning (
Start
) or end (
Stop
) of the user service.
Acct-Input-Octets Authentication stop The number of octets received from the port over the
course of this service.
Acct-Output-Octets Accounting stop The number of octets sent to the port over the course of this
service.
Acct-Session-Id Accounting start
Accounting stop
A unique accounting ID used to match start and stop
records in a log file.
Acct-Authentic Accounting start The method by which the user was authenticated.
Acct-Input-Packets Accounting stop The number of packets received from the port in the course
of delivering this service to a Framed User.
Acct-Output-Packets Accounting stop The number of packets sent to the port in the course of
delivering this service to a Framed User.
Acct-Terminate-Cause Accounting stop The mechanism or reason for terminating the session.