System information

Operation SHOW USER 1-129
Software Release 2.0.1
C613-03018-00 REV A
Figure 1-40: Example output from the SHOW USER command.
Number of logged in Security Officers currently active ...1
User Authentication Database
-------------------------------------------------------------------------------
Username: tony ()
Status: enabled Privilege: user Telnet: no
Ip address: 192.168.1.5 Netmask: 255.255.255.0 Mtu: 1500
Logins: 2 Fails: 0 Sent: 0 Rcvd: 0
Username: dave ()
Status: enabled Privilege: Sec Off Telnet: yes
Callback number: 0061393546786 Calling number: 5554491
Logins: 2 Fails: 1 Sent: 0 Rcvd: 0
Username: manager (Manager Account)
Status: enabled Privilege: manager Telnet: yes
Logins: 4 Fails: 0 Sent: 0 Rcvd: 0
-------------------------------------------------------------------------------
Active (logged in) Users
------------------------
User Port/Device Location Login Time
---- ----------- -------- ----------
manager Port 0 local 10:16:08 03-Jul-2000
dave Telnet 1 192.168.1.7 10:15:47 03-Jul-2000
manager Telnet 2 192.168.2.3 10:16:08 03-Jul-2000
Table 1-35: Parameters displayed in the output of the SHOW USER command.
Parameter Meaning
User Authentication
Database
This section shows the contents of the User Authentication
Database
Number of logged in Security
Officers currently active
The number of users currently logged in with SECURITY
OFFICER privilege. This counter does not include users
whose SECURITY OFFICER privilege is disabled because they
have not entered a security command within the
SECUREDELAY period.
Username The login name.
Status The current status of the entry; one of “enabled” or
“disabled”.
Privilege The privilege level for this user; one of “Sec Off”,
“manager” or “user”.
Telnet Whether or not the user is permitted to use the TELNET
command to telnet to a host; one of “yes” or “no”.
IP address The IP address for this user.
Netmask The network mask for this user.
Mtu The MTU for this user.
IPX network The Novell network number assigned to the user. This field
is not present if a network number has not been assigned.
Callback number The ISDN phone number for this user when making a call
back to a remote user.
Calling number The number to check against the incoming calling number
of an L2TP or ISDN call, if the call provides caller ID
information.