System information

Operation SHOW SYSTEM 1-125
Software Release 2.0.1
C613-03018-00 REV A
Figure 1-38: Example output from the SHOW SYSTEM command.
Router System Status Time 17:10:06 Date 25-Sep-1999.
Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Base 62 AR720 M1-0 6845218
IC Module 40 0 AR022 PIC Eth M2-0 6844595
IC Module 38 1 AR023 PIC Sync M1-1 6844715
MAC 67 AR012 CMAC M2-0 33636409
--------------------------------------------------------------------------------
Memory - DRAM : 16384 kB FLASH : 4096 kB
--------------------------------------------------------------------------------
SysDescription
CentreCOM AR720 version 1.8.1-00 08-Sep-1999
SysContact
David Johns, ext 8331
SysLocation
Laboratory, First Floor, Head Office Building
SysName
LAB
SysUpTime
250074 ( 00:41:40 )
Software Version: 1.8.1-00 08-Sep-1999
Release Version : 1.8.1-00 08-Sep-1999
Patch Installed : NONE
Territory : europe
Help File : help.hlp
Boot configuration file: load.cfg (exists)
Current configuration: load.cfg
Security Mode : Disabled
Patch files
Name Device Size Version
--------------------------------------------
52772-02.paz flash 94856 7.7.2-2
--------------------------------------------
Table 1-34: Parameters displayed in the output of the SHOW SYSTEM
command.
Parameter Meaning
Board The board type; one of “Base”, “Expansion”, “Engine”,
“GenericIO”, “IO Module”, “IC Module” or “MAC”.
ID The identification number of the board.
Bay The bay number in which the ICM or IOM expansion card is
installed.
Board Name The descriptive name of the board.
Rev The revision number and hardware modification level of the
board.
Serial number The serial number of the board.
DRAM The amount of DRAM memory installed.
FLASH The amount of FLASH memory installed.
SysDescription A description of the product and software release.
SysContact A string specifying a contact name or address to call for the
router. This is set with the SET SYSTEM CONTACT command on
page 1-89.