System information

1-124 SHOW STARTUP AR Series Router Reference Manual
Software Release 2.0.1
C613-03018-00 REV A
SHOW STARTUP
Syntax
SHOW STARTUP
Description
This command prints the state of the bits in the router Startup Status Flag
(Figure 1-37 on page 1-124). This command can be used to check the state of the
router when it last started up. If a given bit signals an error then its message
has an
>
appended to the front of it.
Figure 1-37: Example output from the SHOW STARTUP command.
SHOW SYSTEM
Syntax
SHOW SYSTEM
Description
This command displays general system information about the router, including
the hardware installed, memory, software release and patches loaded
(Figure 1-38 on page 1-125, Table 1-34 on page 1-125). It will also display
location and contact details if these have been set with the appropriate SET
SYSTEM command.
Router Startup Status Flag is 00600040, which means:
----------------------------------------------------
4096k of RAM found
> Router CRASHED prior to this startup
Battery backed RAM battery OK
Battery backed RAM not corrupted
Real time clock not corrupted
Real time clock, time set
Router software download OK
Router vector download OK
----------------------------------------------------