System information

1-122 SHOW PATCH AR Series Router Reference Manual
Software Release 2.0.1
C613-03018-00 REV A
SHOW PATCH
Syntax
SHOW PATCH
Description
This command displays all patch files stored in NVS (Figure 1-34 on
page 1-122, Table 1-31 on page 1-122). Patch or release files stored in FLASH
are not displayed; these can be displayed with the SHOW FILE command on
page 1-107.
Figure 1-34: Example output from the SHOW PATCH command.
See Also
LOAD
DESTROY PATCH
SHOW RADIUS
Syntax
SHOW RADIUS
Description
This command displays the list of known RADIUS servers (Figure 1-35 on
page 1-122, Table 1-32 on page 1-123). RADIUS servers are used for user
authentication.
Figure 1-35: Example output from the SHOW RADIUS command.
Patch files
Name Device Size Version
---------------------------------------------
28-74.pat flash 376032 7.4.0-11
28760-02.paz flash 109644 7.6.0-02
---------------------------------------------
Table 1-31: Parameters displayed in the output of the SHOW PATCH command.
Parameter Meaning
Name The name of the patch file.
Device The device on which the patch is physically stored; one of “flash”
or “nvs”.
Size The size of the patch file in bytes, expressed as a decimal number.
Version The version number of the patch, consisting of the version number
of the release to which the patch applies, followed by a hyphen
and the generation number of the patch itself.
Server Port AccPort Secret
--------------------------------------
192.168.17.11 1645 1646 ******
172.31.253.9 1645 0 ******
--------------------------------------