System information

Operation SHOW LOADER 1-115
Software Release 2.0.1
C613-03018-00 REV A
See Also
DELETE INSTALL
SET INSTALL
SHOW LOADER
Syntax
SHOW LOADER
Description
This command displays the default values for the LOADER module and the
progress of the current load (Figure 1-29 on page 1-115 and Table 1-27 on
page 1-116).
Figure 1-29: Example output from the SHOW LOADER command.
Table 1-26: Parameters displayed in the output of the SHOW INSTALL command.
Parameter Meaning
Install The type of install; one of “Temporary”, “Preferred” or
“Default”.
Release The release file for the install.
Patch The patch file for the install.
Dmp The third party Data Manipulation Program for the install.
This is not present on most models and software releases.
Current install The install currently running in the router.
Install history A list of checks the INSTALL module carried out on the
install boot. This list shows how the current install came to
be selected and loaded.
Loader Information
------------------------------------------------------------------------------
Defaults:
Method.............. TFTP
File ............... /netupgrades/new.cfg
Server ............. tftp.company.com (192.168.1.1)
HTTP Proxy ......... -
Proxy Port ......... Default ( 80 )
Port ............... -
Destination ........ Flash
Delay (sec) ........ 0
Current Load:
Method.............. HTTP
File ............... /netupgrades/8-200gui.rez
Server ............. www.company.com (192.168.163.22)
TCP Port ........... 80
Destination ....... Flash
Delay (sec) ........ 0
Status ............. Loading
Load Level ......... 0%
------------------------------------------------------------------------------