System information
Operation SHOW FFILE 1-105
Software Release 2.0.1
C613-03018-00 REV A
Figure 1-19: Example output from the SHOW FEATURE command for a specified
special feature licence.
Examples
To display a list of all special feature licences, use the command:
SHOW FEATURE
To display detailed information about special feature licence “Triple DES”, use
the command:
SHOW FEATURE=”Triple DES”
See Also
DISABLE FEATURE
ENABLE FEATURE
SHOW FFILE
Syntax
SHOW FFILE[=file-identifier] [CHECK]
where:
■
file-identifier is a valid FFS file identifier of the form
device:filename.ext
.
Valid characters are the lowercase letters (a–z), digits (0–9) and the hyphen
character (-). Wildcards are allowed in any of the elements.
Description
This command displays a list of the files in the FFS that match the specified file
identifier (Figure 1-20 on page 1-106, Table 1-18 on page 1-106). If a file
identifier is not specified then all files are displayed. Wildcards can be used to
replace any part of the file identifier to allow a more selective display. The
CHECK parameter specifies that the file data checksums are to be verified.
The special feature licence : ENCO
Licence Type : full
Period : -
The included features : 3des Encryption
Table 1-17: Parameters displayed in the output of the SHOW FEATURE command
for a specified special feature licence.
Parameter Meaning
The special feature licence The name assigned to the special feature licence with the
ENABLE FEATURE command on page 1-65.
Licence Type The type of licence; one of “Full”, “30 day Trial”, or
“password incorrect” if an invalid password has been
specified with the ENABLE FEATURE command on
page 1-65.
Period The period for which the licence is valid; either a date range
for a 30-day trial licence or “-” for a full licence.
The included features A list of the special features enabled by this licence.