Installation guide

AT-2971 Solaris Sparc

Manual VLAN

Configuration

The complete VLAN configuration will be carried out in the driver

configuration file /kernel/drv/skge.conf. Please refer to 'man driver.conf'

for further information about these files.

An excerpt from skge.conf looks like the following:

# Configuration file for the skge DualNet/VLAN

driver.

# See skge.txt or skge.htm for a description of

the parameters.

# Uncomment and change the settings you need.

# The decimal value in _Inst0 in all parameters

is the instance

# number of the appropriate adapter. Set it to

needed value.

# ..._Inst0 means instance number 0, ..._Inst1

means instance number

# 1 and so on.

# WARNING: All parameters and values are case

sensitive. Write them

# exactly as shown here!

# All parameters have to be followed by a

semicolon!

# AutoNegotiation: Values are: On, Off, Sense;

Default = On

# AutoNegotiation_A_Inst0="On";

# AutoNegotiation_B_Inst0="On";

# DuplexCapabilities: Values are: Half, Full,

Both; Default = Both

# DuplexCapabilities_A_Inst0="Both";

# DuplexCapabilities_B_Inst0="Both";