Installation guide

Network Adapter Card Installation Guide - Book II
79
Role_?_InstX
Type: string
Default value: Auto
Valid values: Auto
Master
Slave
Note
This parameter is only valid for SK-982x and SK-982x V2.0 adapters.
Note
If auto-negotiation is set to OFF, the correct role must be set
manually.
This parameter defines the role of the port for the physical clock
generation. In order for two 1000Base-T ports to communicate, one
must take the role as master (providing timing information), while the
other must be slave. Usually, this is negotiated between the two ports
during link establishment. If this fails, a port can be forced to a specific
setting with this parameter.
Speed_?_InstX
Type: string
Default value: Auto
Valid values: Auto
1000
100
10
This parameter sets the link speed of the port to the specified value. If
you choose Auto, the adapter will negotiate the speed with the link
partner automatically.
Note
This parameter is only valid for SK-982x V2.0 adapters.