Installation guide

AT-2971 Solaris Sparc
78
The values represent the following configurations:
❑ SymOrRem = SymmetricOrRemote
Both or only the remote link partner are allowed to send PAUSE
frames (possible results: symmetrical flow control, asymmetrical
flow control towards local station, no flow control).
❑ Sym = Symmetric
Both link partners are allowed to send PAUSE frames (possible
results: symmetrical flow control, no flow control).
❑ LocSend = LocalSend
Asymmetrical flow control to other station: only the local link
partner is allowed to send PAUSE frames (possible results: flow
control to other station, no flow control).
❑ None
No link partner is allowed to send PAUSE frames (possible result:
no flow control).
Note
This parameter is ignored if auto-negotiation is set to OFF.
JumboFrames_?_InstX
Type: string
Default value: OFF
Valid values: ON
OFF
Note
This parameter is valid in Dual Net mode only. For Single Net mode
and further details about Jumbo Frames please refer to Per-port
Parameters on page 76.