Installation guide

Novell Netware

If you are using the CardAssistant CD, the names and locations of the

adapter drivers are as follows:

If you are using a Driver Installation Disk, the adapter driver will be

located in the root directory.

5. Press <F3> to change the default path.

6. Press Return.

The adapter driver and other required files are copied to the SYS:

volume.

7. On the next menu, Protocols and Parameters, specify any

parameters where needed. A slot value is required when loading the

adapter driver. If the slot is unknown, driver will correctly detect slot

value when loading.

8. Select Save parameters and load driver.

9. Proceed with the installation as outlined in the Novell

documentation.

Manual

Installation

1. At the file server console prompt, issue the load statement(s) in this

order:

LOAD <DRIVE>:<PATH>\NBI

LOAD <DRIVE>:<PATH>\MSM

LOAD <DRIVE>:<PATH>\ETHERTSM

LOAD <DRIVE>:<PATH>\<DRIVER>

Adapter Card Location

AT-2400 Series \drivers\at2400\netware\

AT-2500/AT-2501 Series \drivers\at2500\netware\

AT-2450/AT-2451 Series,

AT-2700/AT-2701 Series,

AT-2745/AT-2746 Series,

\drivers\at24_27\netware\

AT-2915 Series, AT-2930

Series

\drivers\at29xx\netware\

AT-2916T, AT-2970,

AT-2971 Series

drivers\at2971_16\netware\

1. For additional AT-2916T, AT-2970 and AT-2971 parameter information, refer to the

AT297x.txt

file.