Installation guide

Network Adapter Card Installation Guide - Book II
55
Installing a Network Adapter Driver on Novell NetWare
5.x/6.x
This section contains the procedure for installing a network adapter
driver on a system running Novell NetWare 5.x/6.x.
Files Needed for
Installation
The .LDI file and the .LAN file for your adapter must be present to
succesfully complete installation. The location for each Allied Telesyn
adapter are as follows:
New Server
Installation
The NetWare 5 utility NWCONFIG provides the user with the abitlity to
add additional network adapter cards. At the system console, type
NWCONFIG.
1. Select Driver Options then Configure Network Driver.
2. Select an Additional Driver.
The NWCONFIG displays a list of the available drivers.
3. Press <Insert> to specify a driver not listed.
4. Insert the CardAssistant CD or the Driver Installation Disk into the
appropriate drive.
Adapter Card Location
AT-2400 Series \drivers\at2400\netware\
AT-2500/AT-2501 Series \drivers\at2500\netware\
AT-2450/AT-2451 Series,
AT-2700/AT-2701 Series,
AT-2745/AT-2746 Series,
\drivers\at24_27\netware\
AT-2915 Series, AT-2930
Series
\drivers\at29xx\netware\
AT-2916T, AT-2970,
AT-2971 Series
drivers\at2971_16\netware\
1
1. For additional AT-2916T, AT-2970, and AT-2971 parameter information, refer to the
AT297x.txt file.