Installation guide

Network Adapter Card Installation Guide - Book II

Additional Functions of the Diagnostics Program

Checking Other

Displays and

Data

In addition to performing the three network adapter tests, the

diagnostics program can also read out network adapter-specific data

that may be useful for pinpointing the causes of failure.

You can:

❑ read sensor data

❑ read configuration data

❑ read and write VPD data

❑ read and write Flash EPROM data

Main Program To start the main program, proceed as follows:

1. Boot to DOS and wait for the prompt.

2. Insert the installation CD-ROM into the CD-ROM drive of the

computer in which the network adapter is installed.

3. Type the letter of your CD-ROM drive (for example, D:)

4. Go to the appropriate product directory and type diagGE.

5. Press <Enter>.