Installation guide

Diagnostics
28
12. Insert the CardAssitant CD into the CD-ROM drive.
13. Go to the product directory and type diagGE.
14. Press <Enter>.
15. From the Main Menu of the diagnostics program, select
LOOPB.WRAP PLUG.
16. Press <Enter>.
When the test was successful, the message All tests passed
successfully is dis-played.
When the test fails, the message failed is displayed. The further
procedure is described in section Failure of a Test.
17. Press any key to continue.
18. On the test computer, select Exit to quit the diagnostics program.
19. On the repeater computer, select Exit to quit the diagnostics
program.