Installation guide
Translated Safety and Emission Information
122
Standards: This product meets the following standards.
European Community (EC) Electromagnetic Compatibility Directive
This equipment has been tested and found to comply with the protection requirements of European Emission Standards EN55022
Class B/EN61000-3-2 and the ITE European Immunity Standard EN55024
1 RFI Emission EN55022 Class B, EN61000-3-2, EN61000-3-3
2 Warning: In a domestic environment this product may cause radio interference in which case the user may be required to take
adequate measures.
3 Immunity EN55024
Safety
4 Electrical Safety TUV-EN60950, UL1950, CSA 950, EN60825
5 Laser EN60825
6 This is a “CLASS 1 LED PRODUCT”
7 Warning Do not stare into the Laser beam.
8 Lightning Danger
Danger: Do not work on equipment or cables during periods of lightning activity.
9 Operating Temperature: This product is designed for a maximum ambient temperature of 50 degrees C.
10 All Countries: Install product in accordance with local and National Electrical Codes.
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with this instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Note: Modifications or changes not expressly approved by the manufacturer or the FCC can void your right to operate this
equipment.
Industry Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.