User guide

Provisioning Example - Overview Sample Configuration - Network Level
Telesyn Service Guide (Optimizing All Services (Triple Play))
8-2
8.2 Provisioning Example - Overview
Figure 8-1 is a mapping of all the tasks involved in setting up a multi-service system, and includes a topology
that provides a level of protection for each service.
The NMS menu selections are in bold/italic, with -> for accessing a submenu, such as Policy -> Add Policy.
Following this table are the detailed steps involved to datafill a sample configuration.
Note: As Figure 8-1 shows, the NMS is the primary interface for performing the configuration tasks,
and the CLI is used only when a task cannot be done with the NMS.
TABLE 8-1 Major Tasks to Configure Triple Play for Telesyn Devices
Task
CLI / NMS (Highlight where CLI
only) Main Steps Reference
Nodes (One Time Only)
MAP Devices NMS 1. Using CLI, set up critical
attributes
2. NMS discovers devices and
adds them to network
Servers CLI
Routers NMS
Third Party Interfaces (One Time Only)
GenBand 6 MGCP
Call Agent Attributes
Network Topology (Multiple Telesyn Devices, One Time Only)
Physical Links
Network VLANs Create Network VLANs
Protection Create Protection Configuration
Policies and Profiles (One or Multiple Telesyn Devices, One Time Only)
Create Profiles
Devices
Network Services -> Profiles ->
Create Telesyn Device Profile
For Telesyn devices, Profile Asso-
ciates QoS Priority with 4 or 8
Class of Service (COS) Queue
Mapping