User guide

FE10 Upstream Interface Feature Interaction
Telesyn Service Guide (Special Network Configurations)
7-2
IGMPv2 - IGMP Snooping Y By default, IGMP snooping is enabled on FE/FX ports.
HVLAN N
VLAN Translation N
Multicast channels Y
MAC Limiting Y
MAC Configuration Y
DHCP Relay Y By default, DHCP relay is disabled, and the user can enable it so the
network FE/FX can be the interface to the DHCP server.
Link Recovery
(STP) Y
(RSTP) Y
(LAG - Static) N
EPSR Y An FE interface cannot be added to an EPSR domain as primary or
secondary interface via CLI or NMS, but a VLAN associated with an
FE interface can be added to an EPSR domain.
QOS Classifier
Ethernet format Y
IP Protocol Y
IP Source Y
IP Destination Y
LSAP Y
MAC Source Y
MAC Dest. Y
Layer 2 Protocol Y
TCP Port Source Y
TCP Port Dest. Y
UDP Port Source Y
UDP Port Dest. Y
VID Y
InnerVID N
Priority N
IP TOS N
IP DSCP N
TABLE 7-1 Feature Interactions for FE10 Upstream - Voice, Data, and Video Service (Continued)
Feature Supported? Notes