User guide

Software Engineering Video Services Provided by Fast Ethernet/Fiber
3-25
Telesyn Service Guide (Optimizing Video Services)
• overhead for transmitting over the line
• bandwidth for Electronic Programming Guide (EPG) and emergency action channels
• bandwidth for data
3.3.4.2 FE10/FX10 IGMP Video Configuration
For each ADSL and fiber interface, the following can be configured for the specified Telesyn:
• Three STB with Five streams per STB
3.3.5 Software Engineering
3.3.5.1 Interface Provisioning for Fast Ethernet and Fiber-based Ports
Refer to Section Provisioning Network, Service, and Control Modules and subsection ADSL Port for an
overview of all attributes of these interfaces.
To provide quality video service, the service provider must perform the following tasks:
1. Correctly provision the interface.
2. Monitor the interface so problems or potential problems can be noted and resolved.
3. Ensure service providers have correctly configured the equipment.
4. Check for faults with the physical connection(s) or equipment from the interface to the subscriber’s equip-
ment.
The first two tasks are directly related to provisioning the Telesyn product and are therefore covered both in this
section and other sections of this Guide. Moreover, the Telesyn product helps with the other two tasks by provid-
ing features that help determine if a problem is in a component that is not directly a part of the Telesyn product.
With these features, service providers can provide more timely customer support and ensure the subscriber line is
correctly configured.