Installation guide

27
Chapter 9
Cabling
Overview
This chapter provides information on cabling conventions. For
complete rules of cabling, see ISO/IEEE Publication 8802-3.
10BASE-T Connection
The AT-2450T PCI Ethernet Adapter Card is for use with
10BASE-T segments, using an 8-pin (4-pair) RJ45 jack for the
network cable, shown in Figure 2.
Cable length must not exceed 100 meters (328 ft.).
Figure 2: AT-2450 PCI Ethernet
Adapter Card UTP Port and RJ45
Connector
2450T IG.bk Page 27 Tuesday, December 29, 1998 11:58 AM