Installation guide

Manually Installing a Network Adapter Driver
42
Windows Me
This section contains the procedure for manually installing a network
adapter driver in a Windows Me operating system.
Note
Please review the Installation Guidelines on page 32 before
performing the following procedure.
1. Shutdown Windows Me and power OFF your computer.
2. Install the network adapter card. Refer to Installing a Network
Adapter Card on page 17 and the documentation that came with
your computer for instructions.
3. Power ON the computer.
The Microsoft Installation Wizard displays the window shown in
Figure 20, notifying you that it has detected a new adapter card in
the computer.
Figure 20 Add New Hardware (1 of 2)
4. Select Automatic search for a better driver (Recommended).