Installation guide

Manually Installing a Network Adapter Driver
40
7. If you are using the CardAssistant CD, do the following. If you are
using a driver installation disk, proceed to Step 8.
a. Insert the CardAssistant CD into the CD-ROM drive.
Note
If your computer launches the web browser when you insert the
CD, minimize or close the web browser window.
b. Select CD-ROM drive.
c. Click on Specify a location, if not already selected.
d. In the Specify a Location field, enter the drive letter and path to
the adapter driver. The adapter driver locations on the
CardAssistant CD are:
For example if you are installing an adapter driver for an
AT-2500 Series adapter and the CD is mapped to drive D, you
would enter: D:\drivers\at2500
e. Click Next.
f. Proceed to Step 9.
8. If you are using a driver installation disk, do the following:
a. Insert the driver installation disk into the floppy disk drive.
b. Select Floppy disk drives.
c. Select Specify a location, if not already selected.
d. In the Specify a Location field, enter A:\. The adapter driver is
stored in the root directory on the disk.
Adapter Card Driver Location
AT-2400T, AT-2400BT \drivers\at2400
AT-2450FXT \drivers\at24_27
AT-2500, AT-2500TX,
AT-2501
\drivers\at2500
AT-2700TX, AT-2700FX,
AT-2700FTX, AT-2745FX
\drivers\at24_27
AT-2701 \drivers\at2701
AT-2915T, AT-2930 \drivers\at29xx