- Allied Telesis, Inc Switches Datasheet

Features in 281-01 24
Version 281-02
C613-10482-00 REV B
CR00012708
many 3 The command show debug active displays information about currently-active
debugging for many modules at once. Similarly, the command disable debug
active disables debugging for many modules in a single step.
This Software Version extends the list of modules that these commands act on.
They now apply to all modules with debug support, except for DS3, ACC, Q931,
SA, SYN, TPAD, and X25C.
YYYYYYYYYY
CR00012786
IP Gateway 3 When a link that had RIP configured on it went down, so that the router or switch
used an alternative route, output from the command show ip route sometimes
displayed incorrect information when the link came back up. When the link first
comes back up, the route's RIP metric is still 16, so the alternative route is still the
“best” route to the target. However, show ip route sometimes displayed a
disabled route over the original link, with a RIP metric of 16, as the best route,
even though the router or switch correctly used the alternative route.
This issue has been resolved.
YYYYYYYYYY
CR00012895
IP Gateway 3 Previously, the router accepted ARP entries with multicast IP and MAC addresses
when the MAC disparity feature was disabled. The MAC disparity feature is
disabled by default.
The issue has been resolved. The router now discards such ARP entries unless the
MAC disparity feature has been enabled by using the command enable ip
macdisparity.
YYY- ------
CR00012947
Log 3 When a user entered the command show log receive=ipadd mask=mask, the
router or switch displayed an error message that said mask was not a valid
parameter.
This issue has been resolved. The mask parameter is now valid for this command.
YYYYYYYYYY
CR00013007
IPsec 3 With tunnel-mode IPsec, the router or switch decremented the time to live (TTL)
of IP packets twice when it forwarded the packets through the tunnel.
This issue has been resolved.
YYYYY-----
CR Module Level Description
AR400 AR7x5 AR750S / AR770S Rapier i AT-8800 AT-8600 AT-8700XL AT-8948 / x900-48 AT-9900 AT-9800