User's Manual

Chapter 2: Installing the Access Point
30
Figure 8. Attaching the Mounting-Bracket Screw
Attaching the
Access Point to
the Base Plate
To attach the access point and mounting bracket to the base plate on the
wall or ceiling, perform the following:
1. Have someone hold the bottom of the access point next to the base
plate attached to the wall or ceiling.
2. Insert the two base-plate pins into the circles of the keyhole slots, as
shown in Figure 9.
Figure 9. Attaching Access Point to Base Plate
3. Slide the access point downward to lock the necks of the base-plate
pins in the slots, as shown in Figure 9.
Step 2 Step 3
Step 4
Step 3
Review Draft 2-1-16