User's Manual

AT-AP500 Wireless Access Point Installation Guide
21
LEDs
The LEDs on the AT-AP500 Access Point are described in Table 3.
Table 3. LEDs on the AT-AP500 Access Point
LED State Description
PWR Solid Green The unit is receiving DC power that is
within the normal operating range.
Off The power supply is not receiving power
from either the AC/DC power adapter or a
PoE+ Ethernet switch.
SYS Solid Amber The access point is loading its firmware or
there is a system fault.
Off The unit is operating normally.
LAN Solid Green The Ethernet port is operating at 1000
Mbps.
Flashing
Green
The Ethernet port is operating at 1000
Mbps with link activity.
Solid Amber The Ethernet port is operating at 10/100
Mbps.
Flashing
Amber
The Ethernet port is operating at 10/100
Mbps with link activity.
2.4GHz Solid Green The 2.4GHz radio is sending and receiving
radio waves.
5GHz Solid Green The 5GHz radio is sending and receiving
radio waves.
Review Draft 2-1-16