User's Manual

AT-AP500 Wireless Access Point Installation Guide
17
Rear Panel Components
The rear panel components of the AT-AP500 Access Point are illustrated
in Figure 1.
Figure 1. Rear Panel Components
The components are listed in Table 1.
Table 1. Components on the Rear Panel
Field Description
Kensington Lock Lock to secure the access point. For
information, refer to “Kensington Lock” on
page 34.
Console Port The Console port is for manufacturing
purposes only.
Reset Button Reboots the unit. For information, refer to
“Reset Button” on page 22.
LAN Port The LAN port connects the access point
to your wired network. It supports PoE+. If
you connect the port to an Ethernet switch
that supports PoE+, you do not have to
use the AC/DC adapter to power the
device. For information, refer to “LAN
Port” on page 19.
Reset
Button
Console
Port
Kensington
Lock
DC Power
Connector
LAN Port
Review Draft 2-1-16