System information

C613-10501-01-REV B Software Release Note AlliedWare Plus Version 5.3.4-0.1 29
Description:
System
Configuration
File System /
Move File or
Folder
Select the file or folder you want to move then click on the Move
File or Folder icon located directly below the File System label.
Choose the Destination Folder from the drop down list in the
Move File dialog then select OK to move the file or folder to the
chosen destination.
File System /
Download File
Select the file you want to download then click on the Download
File icon located directly below the File System label.
File System /
Upload File
Select the file you want to upload then click on the Upload File icon
located directly below the File System label.
File System /
Delete File or
Folder
Select the file or folder you want to delete then click on the Delete
File or Folder icon located directly below the File System label.
Label / Field / Button Description (cont.)
Label / Field / Button Description
System
Configuration
Configures running and backup software, GUI software, and
configuration files in Flash or card memory available on the switch.
System
Configuration /
Next Boot
Firmware
Choose the Next Boot Firmware .rel file and path from the drop
down list then click Set to make this file the firmware that starts
after reboot.
System
Configuration /
Backup Boot
Firmware
Choose the Backup Boot Firmware .rel file and path from the drop
down list then click Set to make this file the fallback boot firmware
at reboot.
System
Configuration /
GUI Files
Displays the GUI file name and file location on the switch and
indicates the currently running GUI file with a prefixed asterisk (*)
(e.g. * flash:/gui_534_06.jar).
Note that you cannot set the GUI version from within the GUI
itself. See the GUI installation instructions in Appendix C: GUI
Reference of the current AW+ Software Reference to install GUI files.
System
Configuration /
GUI Files
Choose the GUI Files .jar file and path from the drop down list then
click Set to make this file the GUI file that you connect to after
reboot.
System
Configuration /
Config Files
Choose the Config Files .cfg file and path from the drop down list
then click Set to make this file the config file that the switch uses at
reboot.