System information

C613-10501-01-REV B Software Release Note AlliedWare Plus Version 5.3.4-0.1 23
Installing this Software Version
To use this software version, your switch must already be running AlliedWare Plus. Contact
your distributor or reseller for more information.
To install and enable this software version, use the following steps:
1. Copy the software version file (.rel) onto your TFTP server.
2. If necessary, delete or move files to create space in the switch’s Flash memory for the
new file.
To see the memory usage, use the command:
awplus#show file systems
To list files, use the command:
awplus#dir
To delete files, use the command:
awplus#del <filename>
You cannot delete the current boot file.
3. Copy the new release from your TFTP server onto the switch.
awplus#copy tftp flash
Follow the onscreen prompts to specify the server and file.
4. Set the switch to reboot with the new software version either for x600 series switches:
awplus#configure terminal
awplus(config)#boot system r6-5.3.4-0.1.rel
or for x908 / x900 series switches:
awplus#configure terminal
awplus(config)#boot system r1-5.3.4-0.1.rel
Return to Privileged Exec mode and check the boot settings, by using the commands:
awplus(config)#exit
awplus#show boot
5. Reboot using the new software version.
awplus#reload