System information

C613-10501-01-REV B Software Release Note AlliedWare Plus Version 5.3.4-0.1 17
auth guest-vlan Command Modified Y Y Authentication
Commands
This command enables and configures the
Guest VLAN feature on the interface specified
by associating a Guest VLAN with an interface.
The new optional routing parameter enables
routing from the Guest VLAN to another
VLAN, so the switch can lease DHCP
addresses and accept access to a limited
network.
auth log Command New Y Y Authentication
Commands
Use this command to configure the types of
authentication feature log messages that are
output to the log file.
auth-web-server
dhcp ip address
Command New Y Y Authentication
Commands
Use this command to assign an IP address and
enable the DHCP service on the web
authentication server for supplicants (client
devices).
auth-web-server
dhcp lease
Command New Y Y Authentication
Commands
Use this command to set the DHCP lease time
for supplicants (client devices) using the DHCP
service on the web authentication server.
auth-web-server
mode
Command New Y Y Authentication
Commands
Use this command to configure the mode
(from the intercept, none, or promiscuous
modes available) on the Web-authentication
server for supplicants (client devices).
dot1x max-auth-
fail
Command New Y Y 802.1X
Commands
Use this command to configure the maximum
number of login attempts for a supplicant
(client device) using the auth-fail vlan feature,
when using 802.1X port authentication on an
interface.
Local RADIUS Server
show radius local-
server statistics
Command Modified Y Y Local RADIUS
Server
Commands
Use this command to display statistics about
the local RADIUS server. Note the ‘Unknown
username’ and ‘Invalid passwords’ fields in the
output have been replaced by a ‘Failed Logins’
field.
DHCP Snooping
DHCP Snooping Feature New Y Y DHCP
Snooping
Introduction
DHCP snooping can be used to increase
network security and traceability by filtering
traffic according to valid DHCP leases. DHCP
snooping on the switch supports traffic filtering,
DHCP Option 82, ARP security, and MAC
address verification.
arp security Command New Y Y DHCP
Snooping
Commands
Use this command to enable ARP security on
VLANs.
arp security
violation
Command New Y Y DHCP
Snooping
Commands
Use this command to specify the action to take
if an ARP security violation is detected on the
ports.
Table 2: New and modified features and commands
Feature/
Command/
MIB
Ty p e Status
x600
x908/x900
Software
Reference
Chapter
Description