Instruction Manual

C613-16092-00 REV D
The transit node receives a Ring-Up-Flush-FDB message, which indicates that the master
node knows that all links in the ring are up again. The transit node unblocks port 2 for vlan2,
flushes its FDB, sends a trap, and changes state to Link-Up.
This is the packet shown in step 8 on page 51 of the master node debug output.
The transit node continues receiving Health messages for as long as the ring stays in a state of
Complete.
This is the packet shown in step 10 on page 52 of the master node debug output.
8. The transit node receives a Ring-Up-Flush-FDB message
EPSR Port1 Rx: 00e02b00 00040000 cd280619 8100e3e8 005caaaa 0300e02b
00bb0100 00541fea 00000000 0000cd28 0619990b 00400106 03e80000 00000000
cd280619 00000000 01000000
EPSR Port1 Rx:
-----------------------------------------------------------------------
TYPE = RING-UP-FLUSH-FDB STATE = COMPLETE
CTRL VLAN = 1000 SYSTEM = 00-00-cd-28-06-19
HELLO TIME = 0 FAIL TIME = 0
HELLO SEQ = 0
-----------------------------------------------------------------------
Unblock EPSR:test port:2 VLAN:2
Flush FDB EPSR: test vid: 2
EPSR INFO: Send trap EPSR:test oldState:PRE-FORWARDING newState:LINK-UP
nodeType:TRANSIT
EPSR test oldState:PRE-FORWARDING newState:LINK-UP
9. The transit node receives Health messages
Manager 9924-B>
EPSR Port1 Rx: 00e02b00 00040000 cd280619 8100e3e8 005caaaa 0300e02b
00bb0100 00541e71 00000000 0000cd28 0619990b 00400105 03e80000 00000000
cd280619 00010002 01000177
EPSR Port1 Rx:
-----------------------------------------------------------------------
TYPE = HEALTH STATE = COMPLETE
CTRL VLAN = 1000 SYSTEM = 00-00-cd-28-06-19
HELLO TIME = 1 FAIL TIME = 2
HELLO SEQ = 375
----------------------------------------------------------------------
.
.
.