Owner manual

10. Click on the button. If the IP Address, Login Name, Password,
and SNMP Read Community that you specified are correct, then the Device Family,
Device Model, Serial Number, System Name, System Description and Configuration
File fields should now be set. If an error occurs, please re-check the values you
entered in steps (6) to (9).
11. Finally, click on the button to add the device.
12. Your new device should now be added. If you check the Device Families pane,
you should see the IP Address of your device under the group called, "Test Group".
AlliedView™-UM 2.0 USER’S GUIDE Page 10 of 128