Owner's manual

AlliedView™-EMS 4.0.3 VLAN MANAGER USER’S GUIDE Page 45 of 77
Input Field Valid Values Length
Identifier (cannot
be modified)
1 - 4094 -
6.6.3 Notes
• An uplink port must be specified to change the VLAN Mode to "Multiple VLAN"
or to "802.1Q Multiple VLAN". Specifying an incorrect port as the uplink port will
cause VLAN Manager to lose connection with the device without any warning.
Exercise caution.
• Modifying the default VLAN definition will cause all other VLAN definitions
to be deleted. When this happens, the device will need to be restarted.
6 Device Support