User Manual

AlliedView™-EMS 4.0.3 Device Management Guide Page 427 of 468

Converteon Series

This section describes Device Manager menus and operations specific to the Converteon

Series.

Topics:

• Main Window

• Agent Menu

• Status Menu

• OAM Menu

Main Window

AT-CV1200

Note - While the Reset operation is in progress, error "The error with 'Set' operation.

Error: time out occurred." will be displayed and should be ignored.

Note - The current firmware version does not allow Device Manager to support the PWR

LEDs.

Note - AT-CV5M01: Resetting the line card also resets the CPM.

Note - Using an SNMP v3 account that has a NO-READ VACM setting, a 'noSuchName'

or 'noSuchObject' error may be displayed.