User Manual

AlliedView™-EMS 4.0.3 Device Management Guide Page 122 of 468
Spanning Tree Info
Displays the port's spanning tree parameters.
Note - The current firmware version returns a 'noSuchName' value for the Path
Cost Contribution parameter.
Note - Valid MIB Set values for the Port Path Cost parameter is in the range
[1-65535] inclusive. However, the application allows it to be configured up to the
value of 200000000.
Note - Setting the Spanning Tree Status parameter to "disable" will result to losing
the connection with the AT-9000/xx device and the only way to re-establish
connection is to perform a manual reboot.
Note - Values entered for the Port Priority parameter must be multiples of 16.
Enable
Enables the port.
Disable
Disables the port.
AT-9000/xx Series