User Manual

AlliedView™-EMS 4.0.3 Device Management Guide Page 119 of 468
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Routing Menu
From the Routing menu, you can view and edit information about the switch's routing
functions.
IP
ARP Table
Displays the ARP cache on the switch .
Note - The current firmware version does not allow the Physical Address and
Mapping Type parameters to be configured.
Address Table
Displays the list of the IP interfaces on the switch.
Note - The current firmware version returns a 'noSuchName' value for the
Re-assemble Max Size parameter.
Route Table
Displays the IP routing table on the switch.
Note - The current firmware version returns a 'noSuchName' value for the
following parameters:
• Destination Metric 2
• Destination Metric 3
• Destination Metric 4
• Route Updated Seconds
• Destination Metric 5
Note - The current firmware version does not allow the following parameters
to be configured:
• Destination Port Number
• Destination Metric 1
• Next Hop Address
• Routing Type
• Routing Mask