User guide

AlliedView™-EMS 4.0.2 DEVICE MANAGER USER’S GUIDE Page 74 of 124
To set a threshold, enter a threshold value in the Value field, then click OK. Note that this
specifies a rising threshold which triggers an event when the variable's value increases
to exceed the threshold, i.e. crosses the threshold from below.
When the threshold is reached, a pop-up message is displayed or a predefined command
is executed. You can select which action is executed in the Option > Option > User Action tab.
Note - Thresholds can only be used for variables of type GAUGE, INTEGER, COUNTER,
GAUGE32, INTEGER32, COUNTER32, or COUNTER64.
6 MIB Variable Window