Manual

AlliedView™-EMS 4.0.2 Device Management Guide Page 400 of 441
Converteon Series
This section describes Device Manager menus and operations specific to the Converteon
Series.
Topics:
• Main Window
• Agent Menu
• Status Menu
• OAM Menu
Main Window
AT-CV1200
Note - While the Reset operation is in progress, error "The error with 'Set' operation.
Error: time out occurred." will be displayed and should be ignored.
Note - The current firmware version does not allow Device Manager to support the PWR
LEDs.
Note - AT-CV5M01: Resetting the line card also resets the CPM.
Note - Using an SNMP v3 account that has a NO-READ VACM setting, a 'noSuchName' or
'noSuchObject' error may be displayed.