Owner manual

AlliedView™-EMS 3.11 QoS Manager User’s Guide Page 55 of 146
Property Name Description Valid Values
type of the packet. • EthII-Tagged
• 802.2-Untagged
• 802.2-Tagged
Priority Specifies the priority level of a
tagged Ethernet frame.
Range: 0-7
VLAN Specifies the VID number and name
of a tagged or port-based VLAN.
This can be set by selecting from a
list of available VLANs or "any"
Protocol Specifies the protocol specified in
the Ethertype field of the MAC
header in an Ethernet frame.
This can be set by selecting any of
the following values:
• IP
• ARP
• RARP
This can also be set by entering an
integer from 1-255.
IP Type of Service Specifies the value of the
precedence field within the TOS
(Type of Service) byte of an IP
packet.
Range: 0-7
IP DSCP Specifies the Code Point bits of the
DiffServ field of an IP packet.
Range: 0-63
IP Protocol Specifies the Layer 3 protocol type. This can be set by selecting any of
the following values:
• TCP
• UDP
• ICMP
• IGMP
This can also be set by entering an
integer from 1-255.
Source IP
Address
Specifies the source IP Address
(either host or host/subnet) of an IP
packet.
This can be set by entering an IP
Address in dotted decimal notation
with an optional mask
• NNN.NNN.NNN.NNN
• NNN.NNN.NNN.NNN/M
Where M = 0-32.
Destination IP
Address
Specifies the destination IP Address
(either host or host/subnet) of an IP
packet.
This can be set by entering an IP
Address in dotted decimal notation
with an optional mask