Owner manual

AlliedView™-EMS 3.11 QoS Manager User’s Guide Page 32 of 146
6.1 AT-8000S Series
Topics:
• General
• Port
• Scheduling
• CoS Priority
• DSCP Priority
• Bandwidth
6.1.1 General
Setting Description Value
QoS Mode Enables/Disables quality of service
(QoS) on the device
• enabled
• disabled
Trust Mode Configures the system to the basic
mode and trust state. It is used to
specify whether the ports are
trusted and which field of the
ingress packets to use to classify
traffic.
• CoS - ingress packets are
classified using packet CoS
values. Untagged packets are
classified using the default
port CoS value.
• DSCP - ingress packets are
classified using packet DSCP
values
6.1.2 Port
Column Name Description Value
Interface
(cannot be
modified)
Lists the interfaces (ports and
channels) available
The available interfaces will depend
on the device model and
configuration.
• standalone - e1, e2..en
• stacked - 1/e1, 1/e2..1/en,
2/e1, 2/e2..s/en
• channels - ch1, ch2..chn
where:
• n = port/channel number
• s = stack id
Default CoS Specifies the default CoS value of an
interface
Range: 0-7